UF Membrane Module 8 iniha PVC Ultrafiltration Membrane Module UFc200AM inu wai inu.

ʻO ka wehewehe pōkole:

● Ke hoʻohālikelikeʻia me 6 iniha a me 10 inch membrane modules, 8 inch ke kumu kūʻai nui loa;

● ʻO 6mm ka mānoanoa o ka hale UPVC, hiki i ka 1MPa ke hoʻomanawanui;

● ʻO ka hana anti-degumming e hana i ka epoxy resin a me ka pāpale hope i mea holoʻokoʻa, e hōʻoia ana i ka pili a me ka paʻa;

● ʻO ka hoʻolālā pale ʻana ma ka puka wai e hoʻemi pono i ka hāʻule ʻana o ka wai holoi hope ma ka hope o nā pulu ʻāwaha;

● Ua hoʻonui ʻia ka ʻenehana hoʻokaʻina hoʻokaʻawale ʻana i ka wai, ʻaʻole keakea ʻia ke kahe ʻana o ka wai a ʻoi aku ka maikaʻi o ka holoi ʻana i hope;


Huahana Huahana

Huahana Huahana

Nānā Huahana

ʻO ka UFc200AM capillary hollow fiber membrane he mea polymer kiʻekiʻe, ʻaʻole e loaʻa kahi loli. ʻO nā mea PVC i hoʻololi ʻia, i hoʻohana ʻia ma kēia huahana, loaʻa ka helu permeable maikaʻi, nā waiwai mechanical maikaʻi, ke kūpaʻa kemika maikaʻi a me ka pale ʻana i ka pollution. ʻO MWCO ka 100K Dalton, ʻo ka membrane ID/OD he 1.0mm/1.8mm, aia ke ʻano kānana i loko-waho.

Nā noi

  • Ka hana ʻana o ka wai mineral, ka wai puna mauna a me nā wai sterile ʻē aʻe.
  • ʻO ka inu ʻana i ka mālama ʻana i ka wai paipu, ka wai ʻili, ka wai punawai, ka wai kahawai, etc.
  • Hoʻomaʻamaʻa mua iā RO.
  • Lapaʻau, hana hou a hoʻohana hou i ka wai ʻōpala ʻoihana.

Hana kānana

Ua hōʻike ʻia kēia huahana i nā hopena kānana ma lalo e like me nā kūlana lawelawe o nā kumu wai like ʻole:

mea hoʻohui Ka hopena
SS, Nā ʻāpana > 1μm Wehe 'ia ≥ 99%
SDI ≤ 3
Bakteria, Virus > 4 log
ʻOhuehue < 0.1NTU
TOC Wehe 'ia: 0-25%

* Loaʻa ka ʻikepili ma lalo o ke ʻano o ka ʻai ʻana i ka wai turbidity <15NTU.

Nā Kūlana Huahana

ka wehewehe huahana15

Nā palena ʻenehana:

ʻAno kānana loko-waho
Mea Membrane PVC i hoʻololi ʻia
MWCO 100K Dalton
ʻĀpana Membrane 27m2
Membrane ID/OD 1.0mm/1.8mm
Anana Φ200mm*1480mm
Nui Hoʻohui DN40 Hui

ʻIkepili noiʻi:

Ka Wai Maʻemaʻe 7,000L/H (0.15MPa, 25 ℃)
Hoʻolālā ʻia ʻo Flux 35-100L/m2.hr (0.15MPa, 25 ℃)
Manaʻo ʻia ke kaomi hana ≤ 0.2MPa
ʻO ke kiʻekiʻe kiʻekiʻe o ka Transmembrane Pressure 0.2MPa
ʻO ka wela hana kiʻekiʻe loa 45 ℃
PH Lahi Hana: 4-10; Holoi: 2-12
Ke ano hana Kahe-kea a i ʻole Make-hope

Pono wai hānai:
Ma mua o ka hānai ʻana i ka wai, pono e hoʻonohonoho ʻia kahi kānana palekana <50 μm i mea e pale ai i ka paʻa ʻana i hana ʻia e nā mea nui i loko o ka wai maka.

ʻOhuehue ≤ 15NTU
ʻAila a me ka momona ≤ 2mg/L
SS ≤ 20mg/L
Huina Hao ≤ 1mg/L
Klorine Koe mau ≤ 5ppm
COD Manaʻo ʻia ≤ 500mg/L

* ʻO nā mea o ka UF membrane he polymer organic plastic, ʻaʻole pono e loaʻa nā mea hoʻoheheʻe kūlohelohe i ka wai maka.

Nā ʻāpana hana:

ʻO ke kaomi holoi hope kiʻekiʻe 0.2MPa
Holoi Holoi hope 100-150L/m2.hr
Ka pinepine holoi hope ʻO kēlā me kēia 30-60 min.
Ka lōʻihi o ka holoi ʻana 30-60s
CEB Frequency 0-4 mau manawa i ka lā
CEB Ka lōʻihi 5-10min.
CIP Frequency I kēlā me kēia 1-3 mahina
Holoi Kemika:
Ka hoʻopaʻa ʻana 15ppm Sodium Hypochlorite
Holoi Hoomaemae Organic 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Holoi ʻino ʻino ʻole 1-2% ʻAka Citric / 0.2% ʻAka Hydrochloric

Mea Māhele:

Māhele Mea waiwai
Membrane PVC i hoʻololi ʻia
Sila ʻana Epoxy resins
Hale noho UPVC

  • Mua:
  • Aʻe:

  • E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou